抛丸机常用参数及工作原理

青岛普华重工为您分解抛丸机常用参数及工作原理：
   
在里面抛丸设备我们之前看到的机理，研究对象是抛丸机的工作原理和设备结构、日常维护保养等要点，所以抛丸机的冷却循环系统会更加精细化，进行细致的研究，下面小编会附上设备参数。
抛丸机常用参数数据：

钢板厚度600~1200mm，原抛丸量3400KG，抛丸器数量约7~13台，抛丸器转速1500~2500转，输出功率抛丸设备是 90/KW。

抛丸机的工作原理
1.该抛丸机高速旋转时会产生离心力和反作用力。只有这样，才能将抛丸速度提高到有利于高速旋转下气流形成的状态，使金属工件表面获得一层抗氧化层。
2.When the 抛丸设备throws the metal material layer, it is to clean up the rusty iron and oxide layer on the surface of the workpiece. It will enter the transportation room through the bottom of the 抛丸设备for lifting, and the lifter will automatically send the shot material after it is separated. In the recycling system of the 抛丸机, waste is recycled to reduce labor costs.
3.Because the 抛丸机 adopts a fully enclosed mode, the workpiece 抛丸机 produces a strong impact effect during high-speed operation, and will be worn to a certain extent by the outside of the 抛丸机 itself, so the equipment will be equipped with a cleaning room inside. The dust and debris left behind during the 抛丸机 are well treated.